催化裂解富气吸收液的离子色谱法测定

以催化裂解富气吸收液为测定对象，建立吸收液中目标离子（包括NO2^-，NO3^-，SO4^2-）的离子色潜分析方法。在选定色谱柱的前提下，通过优化淋洗液浓度等色谱条件，实现了在大量干扰离子S^2-及与SO4^2-相邻的未知离子存在的三乙醇胺溶液中目标离子的定量。方法的检出限分别为NO2^- 62μg／L，NO3^- 26μg／L，SO4^2- 90μg/L，RSD值为0．73％～1．19％，加标回收率在91％～109％。     

气相色谱法分析生产过程中的邻甲基苯胺

气相色谱法测定工业生产过程中邻甲基苯胺及其杂质邻硝基甲苯、间甲基苯胺、对甲基苯胺的含量。4种物质的浓度与色谱峰面积呈良好的线性关系,测定结果与标准值基本一致。邻甲基苯胺、邻硝基甲苯、间甲基苯胺、对甲基苯胺的RSD分别为0.0025%、1.4081%、0.9929%、1.1365%,检出限分别为0.065、0.044、0.062、0.056mg/L。     

气相色谱法测定汽油中苯含量不确定度的评定

通过分析气相色谱法测定汽油中苯含量的操作流程对汽油中的苯含量测量结果的不确定度进行了评定,不确定度主要来源于相对定量校正因子、样品中添加内标物丁酮的体积、样品的体积、样品中苯与内标物丁酮面积的平均值之比、标准物质苯的纯度等参数引入的不确定度。其中相对校正因子引入的不确定度最大。当汽油样品中苯的体积分数为0.57%时,苯含量的扩展不确定度为0.02%(k=2)。     

A supported gold catalyst for the elimination of hydrogen from CO2 feed gas in the production of urea

Supported gold catalyst for eliminating hydrogen from CO₂ feed gas in the production of urea is found to be superior to other industrial catalysts (e.g. Pt/Al₂O₃ and PdPt/Al₂O₃) in catalytic activity and resistance to sulfur poisoning.     

固相微萃取-气相色谱-质谱联用测定水中酚类化合物

建立了固相微萃取与气相色谱－质谱联用技术（SPME－GC－MS）测定水中酚类化合物的新方法，探讨了萃取时间、搅拌速度、离子强度、pH值和解吸时间等条件对萃取量的影响。结果表明：65μm PDMS/DVB涂层对水中的酚类化合物有较好的萃取效果，用于水中酚类化合物的测定，结果满意。     

Synthesis, X-ray crystal structures, and gas sorption properties of pillared square grid nets based on paddle-wheel motifs: implications for hydrogen storage in porous materials

A systematic modulation of organic ligands connecting dinuclear paddle-wheel motifs leads to a series of isomorphous metal-organic porous materials that have a three-dimensional connectivity and interconnected pores. Aromatic dicarboxylates such as 1,4-benzenedicarboxylate (1,4-bdc), tetramethylterephthalate (tmbdc), 1,4-naphthalenedicarboxylate (1,4-ndc), tetrafluoroterephthalate (tfbdc), or 2,6-naphthalenedicarboxylate (2,6-ndc) are linear linkers that form two-dimensional layers, and diamine ligands, 4-diazabicyclo[2.2.2]octane (dabco) or 4,4'-dipyridyl (bpy), coordinate at both sides of Zn(2) paddle-wheel units to bridge the layers vertically. The resulting open frameworks [Zn(2)(1,4-bdc)(2)(dabco)] (1), [Zn(2)(1,4-bdc)(tmbdc)(dabco)] (2), [Zn(2)(tmbdc)(2)(dabco)] (3), [Zn(2)(1,4-ndc)(2)(dabco)] (4), [Zn(2)(tfbdc)(2)(dabco)] (5), and [Zn(2)(tmbdc)(2)(bpy)] (8) possess varying size of pores and free apertures originating from the side groups of the 1,4-bdc derivatives. [Zn(2)(1,4-bdc)(2)(bpy)] (6) and [Zn(2)(2,6-ndc)(2)(bpy)] (7) have two- and threefold interpenetrating structures, respectively. The non-interpenetrating frameworks (1-5 and 8) possess surface areas in the range of 1450-2090 m(2)g(-1) and hydrogen sorption capacities of 1.7-2.1 wt % at 78 K and 1 atm. A detailed analysis of the sorption data in conjunction with structural similarities and differences concludes that porous materials with straight channels and large openings do not perform better than those with wavy channels and small openings in terms of hydrogen storage through physisorption.     

Study of migration of active components of phosphorescent oxygen sensors for food packaging applications

A study of migration of the active components of oxygen sensors into food is presented. Six types of sensors, based on different oxygen sensitive dyes (two metalloporphyrins and one ruthenium dye), polymers (polystyrene and polysulfone) and support materials, were exposed to a number of standard ‘food simulants’ recommended by FDA/EU guidelines and then assayed for migration or sensor components and changes in oxygen calibration. Both metalloporphyrin sensor dyes leached only in olive oil and in 95% ethanol (used as a positive control), at maximum levels of 19.22 μg/dm² for PtOEPK and 113.96 μg/dm² for PtTFPP. The RuDPP dye showed maximum leaching in 95% ethanol (25.19 μg/dm²) while also migrating in an acidic aqueous simulant. Planar supports such as polyester tended to enhance the stability of the sensor. Migration of the styrene monomer from the polystyrene encapsulation medium was concluded to be low enough to be insignificant. Migration of sensor components was shown to correlate with the changes in sensor response to oxygen. Based on these results, sensor combinations were ranked on the basis of their resistance to leaching and their general stability, safety and suitability for use on a large scale in packaged foods and related food applications was proven.     

天花粉蛋白的化学——Ⅴ.粉末状结晶天花粉蛋白的拉曼光谱

本文报道粉末状结晶天花粉蛋白的拉曼光谱。酰胺Ⅰ和酰胺Ⅲ的振动谱带在1680和1250 cm~(-1)。骨架C_α—C—N的振动谱带在965 cm~(-1)。苯丙氨酸残基的特征谱带在1010和1620 cm~(-1)。酪氨酸残基的特征谱带在845和862 cm~(-1)。色氨酸残基的特征谱带在765 cm~(-1)。酰胺Ⅰ和Ⅲ的谱带中,B折叠和无序结构的特征较为明显。表征无序结构的965 cm~(-1)谱带很弱。     

毛细管气相色谱法测定染发剂中七种染料组份

采用毛细管气相色谱法对染发剂中苯酚、邻苯二酚、对苯二酚、间苯二酚、邻苯二胺、对苯二胺和间苯二胺七种染料进行了分析。结果表明，该方法能有效地分离这七种染料，其检出限为苯酚50ng、邻苯二胺160ng、对苯二胺240ng、邻苯二酚280ng、间苯二胺180ng、对苯二酚190ng、间苯二酚180ng。方法测定精密度为2.07-4.33％，回收率为96.1％-103.3％。方法具有操作准确、简单、快速、实用等特点。     

General application of jäntti's method for the fast calculation of sorption equilibrium

On the basis of a molecular model for adsorption kinetics Jäntti introduced a method to calculate equilibriums shortly after a change of the pressure of the sorptive gas. In the present paper we show that this method is useful in many more situations than those intended originally.